Method1: Using the Dahua ConfigTool. The Dahua ConfigTool is a software program that allows you to manage and configure Dahua devices, including IP cameras. To reset a camera using the ConfigTool, simply select the camera in the program and click the "Reset" button. Download the "ConfigTool" IP search tool from Google on the computer.
Howto reset dome camera: To Reset Hikvision IP Network Bullet Camera to default settingsReset a hikvision camera with reset
HikvisionCamera URLs. Try the following connection options in iSpy or Agent DVR to connect to your Hikvision IP camera. The settings for Hikvision cameras are built right into our free surveillance software - the inbuilt wizard will automatically setup your Hikvision cameras.Remember to also try connecting via ONVIF as Hikvision cameras may support ONVIF connections as well.
TheNVR PoE-connected cameras must have the NVR PoE interface IP address set as their default gateway. Usually This is so the camera has a route out through the NVR to the LAN, it has to be in the same address range as the camera IP address. And on the Hikvision camera side, you will need to use the below settings:
GaryBlenkhorn said: Now I cannot access the NVR through any web browser. Suggestion : Use SADP to find the NVR, and check if the IP address matches what you believe the NVR static address to be. Double-click the IP address shown in SADP and see if that gives an NVR login page.
Wehave a HIKVISION NVR at our main location that is setup on the Server VLAN and the Camera VLAN for site 1. Server side: . Camera Side: 10.1.24.50. It sees the cameras we have setup with a 10.1.24.x IP address just fine. However we have another site that wanted camera's. They were setup as follows:
. 115 435 242 134 310 433 294 440
how to set ip address in hikvision camera
